Contractor License from New Mexico to Nevada: Does It Transfer? (2026)
A contractor license transfers from New Mexico to Nevada by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Nevada State Contractors Board, verify your New Mexico license, and meet Nevada's endorsement requirements. Nevada deems New Mexico contractor licenses equivalent and usually waives its trade exam for them, which is what this endorsement application relies on. Licensure by endorsement waives the Nevada state-specific trade examination and the experience-certification requirement for applicants licensed (with the same qualified individual) for the past four years in an equivalency-chart state; the Nevada Business and Law examination is still required. The waiver is classification-specific per each state equivalency chart, and some classifications still require the Nevada trade exam.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Nevada has no license-to-license agreement covering New Mexico for the selected trade, so this move runs on Nevada's case-by-case endorsement process. Nevada's equivalency lists cover New Mexico general contractor licenses for licensure by endorsement, usually waiving its trade exam; that is not license reciprocity. If you do commercial general-building work, note that Nevada accepts the NASCLA exam in place of its own trade exam. Electricians should check Nevada's NERA status.
What changes, New Mexico → Nevada
| New Mexico (current) | Nevada (destination) | |
|---|---|---|
| Application fee | $36 (Qualifying Party application fee to PSI; classification license fee is additional and varies by classification (approx. $45-$450 per the CID fee schedule)) | $900 ($900 is what every applicant pays to reach an issued Nevada licence. It is two sequential stages of one pathway, not two alternatives: a $300 nonrefundable application fee due with the application, then a $600 biennial licence fee payable on approval before the licence is issued (and again every two years at renewal). Contractors performing qualified residential work also pay a Residential Recovery Fund assessment before initial issuance and at each two-year renewal - $200 up to a $1,000,000 limit, $500 over $1,000,000, $1,000 for unlimited licences - excluded from the range because it depends on the classification and monetary limit granted. The surety or cash bond ($2,000 or higher as set by the board, with a $200 biennial administrative fee on cash bond deposits), the Nevada Business and Law examination, financial review, and fingerprint processing are all separate.) |
| Processing time | Board does not publish a stated processing time | Not published as a fixed range |
| Licensing authority | New Mexico Regulation & Licensing Department — Construction Industries Division (CID) | Nevada State Contractors Board |
The destination column is what you must satisfy — Nevada sets the rules for this move.
Step by step
- Confirm Nevada's current requirements on the Nevada State Contractors Board website (linked below) — rules change.
- Submit the endorsement application to the Nevada State Contractors Board (application linked below).
- Arrange license verification from your current state.
- Hold an active license with the same qualified individual in the endorsing state for the past four (4) years.
- No license revocation, discipline, or pending proceedings in any jurisdiction.
- Have the endorsing state complete the Request for Verification of License form.
- Pass the Nevada Business and Law examination.
- Provide a financial statement and bond appropriate to the license limit.
- Pay the fees ($900 ($900 is what every applicant pays to reach an issued Nevada licence. It is two sequential stages of one pathway, not two alternatives: a $300 nonrefundable application fee due with the application, then a $600 biennial licence fee payable on approval before the licence is issued (and again every two years at renewal). Contractors performing qualified residential work also pay a Residential Recovery Fund assessment before initial issuance and at each two-year renewal - $200 up to a $1,000,000 limit, $500 over $1,000,000, $1,000 for unlimited licences - excluded from the range because it depends on the classification and monetary limit granted. The surety or cash bond ($2,000 or higher as set by the board, with a $200 biennial administrative fee on cash bond deposits), the Nevada Business and Law examination, financial review, and fingerprint processing are all separate.)). Processing time: Not published as a fixed range.
Official links
Related guides
Frequently asked questions
Does Nevada accept a New Mexico contractor license?
A contractor license transfers from New Mexico to Nevada by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Nevada State Contractors Board, verify your New Mexico license, and meet Nevada's endorsement requirements. Nevada deems New Mexico contractor licenses equivalent and usually waives its trade exam for them, which is what this endorsement application relies on. Licensure by endorsement waives the Nevada state-specific trade examination and the experience-certification requirement for applicants licensed (with the same qualified individual) for the past four years in an equivalency-chart state; the Nevada Business and Law examination is still required. The waiver is classification-specific per each state equivalency chart, and some classifications still require the Nevada trade exam.
What still applies even if reciprocity covers my trade?
Nevada's business and law exam, financial statement, bond, and registration — reciprocity waives the trade exam only, not these.
What does the New Mexico-to-Nevada move cost and how long does it take?
$900 ($900 is what every applicant pays to reach an issued Nevada licence. It is two sequential stages of one pathway, not two alternatives: a $300 nonrefundable application fee due with the application, then a $600 biennial licence fee payable on approval before the licence is issued (and again every two years at renewal). Contractors performing qualified residential work also pay a Residential Recovery Fund assessment before initial issuance and at each two-year renewal - $200 up to a $1,000,000 limit, $500 over $1,000,000, $1,000 for unlimited licences - excluded from the range because it depends on the classification and monetary limit granted. The surety or cash bond ($2,000 or higher as set by the board, with a $200 biennial administrative fee on cash bond deposits), the Nevada Business and Law examination, financial review, and fingerprint processing are all separate.) Processing time: Not published as a fixed range.
Would the NASCLA exam help for this move?
Possibly, for the trade it covers: Nevada's board accepts a NASCLA accredited exam in place of its own trade exam (verified 2026-09-01). The business/law exam, bond and application still apply.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-09-01.
- Nevada State Contractors Board - Licensure by Endorsement ↗ (accessed 2026-07-21)
- Nevada State Contractors Board - New License Application form ($300 nonrefundable application fee; $2,000 minimum bond) ↗ (accessed 2026-09-01)
- Nevada State Contractors Board - FAQ for General Requirements ($300 application processing fee, $600 biennial licence fee, Residential Recovery Fund assessments) ↗ (accessed 2026-09-01)
- NM RLD CID — How to Apply for a Construction Industries License ↗ (accessed 2026-07-21)
- NASCLA — Commercial exam participating state agencies (New Mexico listed) ↗ (accessed 2026-07-21)
- NASCLA — Electrical exam participating state agencies (New Mexico listed) ↗ (accessed 2026-07-21)
Reviewed by the License Reciprocity Editorial Team · verified against primary sources 2026-09-01
How we verify · All sources · spot an error? [email protected]