Contractor License from Tennessee to Alabama: Does It Transfer? (2026)
Last verified: 2026-08-07 · source: Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) ↗
Yes — Alabama has a reciprocity arrangement covering Tennessee license holders. Apply to the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) under its reciprocity/endorsement track; typically you skip the national exam and complete state-specific requirements only.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Reciprocity agreement
Alabama has a trade agreement covering Tennessee — but read it at the trade-and-class level before celebrating. The agreement waives Alabama's exam for the specific trade and class named in the table below; your other licenses may not be covered. What survives for every applicant: Alabama's business and law exam, financial statement, bond, and registration. Confirm your exact trade and class against the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) listing.
What changes, Tennessee → Alabama
| Tennessee (current) | Alabama (destination) | |
|---|---|---|
| Application fee | $250 (Initial contractor license application fee $250. The CPA-prepared reviewed or audited financial statement is a separate professional cost, and some verifying states charge a fee to complete the Board's license-verification form. Beginning July 1, 2026 exams are administered by Prov.) | $220–$315 (Fees are per-board, not additive: General Contractors prime application $300; Electrical reciprocal license $315 (eff. 2/14/2026); HVAC reciprocity $220 (plus $20,000 bond); Home Builders and plumbing fees separate.) |
| Processing time | No processing-time estimate is published; applications are acted on at the Board's scheduled meetings. | ~4 weeks (GC reciprocity applications must be on file 30 days before a quarterly board meeting, so timing depends on the meeting calendar; other boards do not publish a processing range.) |
| Licensing authority | Tennessee Board for Licensing Contractors (Department of Commerce and Insurance) | Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) |
The destination column is what you must satisfy — Alabama sets the rules for this move.
Step by step
- Confirm Alabama's current requirements on the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) website (linked below) — rules change.
- Submit the reciprocity application to the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) (application linked below).
- Arrange license verification from your current state.
- Hold a current, good-standing license in a recognized reciprocal state (GC: 1 year; residential home builder: 3 consecutive years).
- Pass the Alabama business-and-law examination — it is never waived by reciprocity.
- Submit an Out-of-State License Verification form; GC reciprocity applications must be on file 30 days before a quarterly board meeting.
- Electrical reciprocity requires the Alabama Business & Law exam via Provexam; HVAC reciprocity requires a $20,000 performance bond and a letter of good standing from each reciprocal board.
- Pay the fees ($220–$315 (Fees are per-board, not additive: General Contractors prime application $300; Electrical reciprocal license $315 (eff. 2/14/2026); HVAC reciprocity $220 (plus $20,000 bond); Home Builders and plumbing fees separate.)) and allow ~4 weeks (GC reciprocity applications must be on file 30 days before a quarterly board meeting, so timing depends on the meeting calendar; other boards do not publish a processing range.).
Official links
Related guides
Frequently asked questions
Does Alabama accept a Tennessee contractor license?
Yes — Alabama has a reciprocity arrangement covering Tennessee license holders. Apply to the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) under its reciprocity/endorsement track; typically you skip the national exam and complete state-specific requirements only.
What still applies even if reciprocity covers my trade?
Alabama's business and law exam, financial statement, bond, and registration — reciprocity waives the trade exam only, not these.
What does the Tennessee-to-Alabama move cost and how long does it take?
$220–$315 (Fees are per-board, not additive: General Contractors prime application $300; Electrical reciprocal license $315 (eff. 2/14/2026); HVAC reciprocity $220 (plus $20,000 bond); Home Builders and plumbing fees separate.); processing ~4 weeks (GC reciprocity applications must be on file 30 days before a quarterly board meeting, so timing depends on the meeting calendar; other boards do not publish a processing range.).
Would the NASCLA exam help for this move?
If you do commercial general-building work, possibly — about 15 states accept the NASCLA Accredited Commercial General Building exam toward licensure. Check whether Alabama is one on the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) site.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-08-07.
- Alabama Licensing Board for General Contractors — Reciprocity (AR, LA, MS, NC, TN; trade exam waived, business-law not waived; 30 days on file) ↗ (accessed 2026-07-21)
- Alabama Home Builders Licensure Board — Does the Board reciprocate? (TN, SC, MS, LA, NC; 3 years; skills exam waived, business-law not) ↗ (accessed 2026-07-21)
- Alabama Board of Electrical Contractors — Forms and Testing (reciprocal states MS, LA, TN, NC, VA, SC, TX + NASCLA; $315 fee eff. 2/14/2026) ↗ (accessed 2026-07-21)
- Alabama HACR Board — How to Get Licensed (reciprocal states; $220 fee; $20,000 bond; letter of good standing) ↗ (accessed 2026-07-21)
- Alabama Plumbers and Gas Fitters Examining Board — Reciprocation (Mississippi master plumber eff. 1/1/2026; Louisiana LP gas) ↗ (accessed 2026-07-21)
- TN Board for Licensing Contractors — Trade Exam Waiver (Reciprocity) with Tennessee, Rev. 06/2026 (participating states, scope, TN matching classifications) ↗ (accessed 2026-08-07)
- TN Board for Licensing Contractors — Get a Contractor License ($250 fee, Business & Law exam, CPA financial statement, $25,000 threshold) ↗ (accessed 2026-08-07)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-08-07
How we verify · All sources · spot an error? [email protected]