Contractor License from Texas to Alabama: Does It Transfer? (2026)
Last verified: 2026-08-07 · source: Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) ↗
A contractor license transfers from Texas to Alabama by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board), verify your Texas license, and meet Alabama's endorsement requirements. Alabama's construction boards waive only the trade/skills portion of the exam for reciprocity; the Alabama business-and-law examination is never waived. The Licensing Board for General Contractors (commercial and projects $50,000+) reciprocates with 5 states; the separate Home Builders Licensure Board (residential) reciprocates with 5 states; the Board of Electrical Contractors reciprocates with 7 states plus the NASCLA electrical exam; the HACR board (HVAC) reciprocates with 7 states; plumbing/gas-fitting reciprocity is limited to a Mississippi master-plumber agreement effective Jan 1, 2026..
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Alabama does not have a trade agreement covering Texas for the selected trade, so this move runs on Alabama's case-by-case endorsement process. If you do commercial general-building work, check whether Alabama accepts the NASCLA exam — passing it once can replace the trade exam here and in about fourteen other states. Electricians should check Alabama's NERA status.
What changes, Texas → Alabama
| Texas (current) | Alabama (destination) | |
|---|---|---|
| Application fee | $30–$115 (Fees differ by agency and trade: TDLR journeyman electrician $30 and master electrician $45; TSBPE reciprocal license verification $40 non-refundable, plus the IdentoGO fingerprint fee; TDLR ACR out-of-state application $115. There is no state general-contractor license fee because Texas does not license general contractors.) | $220–$315 (Fees are per-board, not additive: General Contractors prime application $300; Electrical reciprocal license $315 (eff. 2/14/2026); HVAC reciprocity $220 (plus $20,000 bond); Home Builders and plumbing fees separate.) |
| Processing time | No single figure applies. TSBPE states a reciprocal plumbing license arrives by US mail within 30 days of the completed online application and payment; TDLR publishes no processing time for electrician or ACR reciprocity. | ~4 weeks (GC reciprocity applications must be on file 30 days before a quarterly board meeting, so timing depends on the meeting calendar; other boards do not publish a processing range.) |
| Licensing authority | Texas Department of Licensing and Regulation (electricians, air conditioning and refrigeration) and Texas State Board of Plumbing Examiners (plumbers); no state general-contractor license | Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) |
The destination column is what you must satisfy — Alabama sets the rules for this move.
Step by step
- Confirm Alabama's current requirements on the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) website (linked below) — rules change.
- Submit the endorsement application to the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) (application linked below).
- Arrange license verification from your current state.
- Hold a current, good-standing license in a recognized reciprocal state (GC: 1 year; residential home builder: 3 consecutive years).
- Pass the Alabama business-and-law examination — it is never waived by reciprocity.
- Submit an Out-of-State License Verification form; GC reciprocity applications must be on file 30 days before a quarterly board meeting.
- Electrical reciprocity requires the Alabama Business & Law exam via Provexam; HVAC reciprocity requires a $20,000 performance bond and a letter of good standing from each reciprocal board.
- Pay the fees ($220–$315 (Fees are per-board, not additive: General Contractors prime application $300; Electrical reciprocal license $315 (eff. 2/14/2026); HVAC reciprocity $220 (plus $20,000 bond); Home Builders and plumbing fees separate.)) and allow ~4 weeks (GC reciprocity applications must be on file 30 days before a quarterly board meeting, so timing depends on the meeting calendar; other boards do not publish a processing range.).
Official links
Related guides
Frequently asked questions
Does Alabama accept a Texas contractor license?
A contractor license transfers from Texas to Alabama by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board), verify your Texas license, and meet Alabama's endorsement requirements. Alabama's construction boards waive only the trade/skills portion of the exam for reciprocity; the Alabama business-and-law examination is never waived. The Licensing Board for General Contractors (commercial and projects $50,000+) reciprocates with 5 states; the separate Home Builders Licensure Board (residential) reciprocates with 5 states; the Board of Electrical Contractors reciprocates with 7 states plus the NASCLA electrical exam; the HACR board (HVAC) reciprocates with 7 states; plumbing/gas-fitting reciprocity is limited to a Mississippi master-plumber agreement effective Jan 1, 2026..
What still applies even if reciprocity covers my trade?
Alabama's business and law exam, financial statement, bond, and registration — reciprocity waives the trade exam only, not these.
What does the Texas-to-Alabama move cost and how long does it take?
$220–$315 (Fees are per-board, not additive: General Contractors prime application $300; Electrical reciprocal license $315 (eff. 2/14/2026); HVAC reciprocity $220 (plus $20,000 bond); Home Builders and plumbing fees separate.); processing ~4 weeks (GC reciprocity applications must be on file 30 days before a quarterly board meeting, so timing depends on the meeting calendar; other boards do not publish a processing range.).
Would the NASCLA exam help for this move?
If you do commercial general-building work, possibly — about 15 states accept the NASCLA Accredited Commercial General Building exam toward licensure. Check whether Alabama is one on the Alabama Licensing Board for General Contractors (plus separate Home Builders Licensure Board, Board of Electrical Contractors, HACR Board, and Plumbers & Gas Fitters Examining Board) site.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-08-07.
- Alabama Licensing Board for General Contractors — Reciprocity (AR, LA, MS, NC, TN; trade exam waived, business-law not waived; 30 days on file) ↗ (accessed 2026-07-21)
- Alabama Home Builders Licensure Board — Does the Board reciprocate? (TN, SC, MS, LA, NC; 3 years; skills exam waived, business-law not) ↗ (accessed 2026-07-21)
- Alabama Board of Electrical Contractors — Forms and Testing (reciprocal states MS, LA, TN, NC, VA, SC, TX + NASCLA; $315 fee eff. 2/14/2026) ↗ (accessed 2026-07-21)
- Alabama HACR Board — How to Get Licensed (reciprocal states; $220 fee; $20,000 bond; letter of good standing) ↗ (accessed 2026-07-21)
- Alabama Plumbers and Gas Fitters Examining Board — Reciprocation (Mississippi master plumber eff. 1/1/2026; Louisiana LP gas) ↗ (accessed 2026-07-21)
- TDLR — Transfer Your Out-of-State Electrician License to Texas (master and journeyman reciprocal states; $45/$30 fees; hour requirements) ↗ (accessed 2026-08-07)
- TDLR — Licensing Reciprocity for Air Conditioning and Refrigeration (Georgia and South Carolina license-to-class mapping) ↗ (accessed 2026-08-07)
- TDLR — Out of State Applicants, Air Conditioning and Refrigeration ($115 fee; insurance minimums; exam may still be required) ↗ (accessed 2026-08-07)
- TSBPE — Reciprocal License Verification Request (Louisiana and Arkansas only; $40 fee; IdentoGO fingerprints; per-state conditions) ↗ (accessed 2026-08-07)
- TSBPE — Reciprocal License Agreement with Louisiana (~30 days by mail) ↗ (accessed 2026-08-07)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-08-07
How we verify · All sources · spot an error? [email protected]