Skip to content
LicenseReciprocity

Contractor License from Texas to Virginia: Does It Transfer? (2026)

Last verified: 2026-08-07 · source: Virginia Board for Contractors (Department of Professional and Occupational Regulation) ↗

A contractor license transfers from Texas to Virginia by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Virginia Board for Contractors (Department of Professional and Occupational Regulation), verify your Texas license, and meet Virginia's endorsement requirements. The DPOR Board for Contractors licenses individual tradesmen (electrical, plumbing, HVAC, gas fitting) and separately licenses contractor firms as Class A, B, or C. Reciprocity exists only through the Board's published Reciprocal Licensing/Examination Agreements and waives the trade examination, not the application or the experience requirements. Electrical tradesman examination reciprocity is published with Alabama, District of Columbia, Kentucky, Maryland, West Virginia, North Carolina, and Ohio (several of those are master-level only). HVAC examination reciprocity is with Maryland only. There is no state-to-state plumber reciprocity — the only plumbing/gas-fitting agreement is with the Washington Suburban Sanitary Commission, a Maryland regional body. For contractor firms there is no full license reciprocity; the Ohio Business and Law exam is accepted in lieu of Virginia's Advanced and General Law exam, and Virginia is a NASCLA Accredited Examination participating agency for the classification comparable to its Commercial Building classification..

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

Virginia does not have a trade agreement covering Texas for the selected trade, so this move runs on Virginia's case-by-case endorsement process. If you do commercial general-building work, check whether Virginia accepts the NASCLA exam — passing it once can replace the trade exam here and in about fourteen other states. Electricians should check Virginia's NERA status.

What changes, Texas → Virginia

Side-by-side: Texas vs Virginia (Contractor (GC/electrical/plumbing/HVAC)), verified 2026-08-07
Texas (current)Virginia (destination)
Application fee$30–$115 (Fees differ by agency and trade: TDLR journeyman electrician $30 and master electrician $45; TSBPE reciprocal license verification $40 non-refundable, plus the IdentoGO fingerprint fee; TDLR ACR out-of-state application $115. There is no state general-contractor license fee because Texas does not license general contractors.)$171.75 (Tradesman license by the Reciprocity method of licensure is $171.75, which includes the HB30 technology fee of $7.25 per year. Card Exchange is $131.75. Contractor firm (Class A/B/C) business licenses are a separate DPOR application with their own fee schedule, not captured here. PSI exam fees, where an exam is still required, are paid directly to PSI ($40/$72/$85).)
Processing timeNo single figure applies. TSBPE states a reciprocal plumbing license arrives by US mail within 30 days of the completed online application and payment; TDLR publishes no processing time for electrician or ACR reciprocity.DPOR does not publish a processing-time range for tradesman reciprocity applications; set null rather than estimated.
Licensing authorityTexas Department of Licensing and Regulation (electricians, air conditioning and refrigeration) and Texas State Board of Plumbing Examiners (plumbers); no state general-contractor licenseVirginia Board for Contractors (Department of Professional and Occupational Regulation)

The destination column is what you must satisfy — Virginia sets the rules for this move.

Step by step

  1. Confirm Virginia's current requirements on the Virginia Board for Contractors (Department of Professional and Occupational Regulation) website (linked below) — rules change.
  2. Submit the endorsement application to the Virginia Board for Contractors (Department of Professional and Occupational Regulation) (application linked below).
  3. Arrange license verification from your current state.
  4. Submit a Certification/Letter of Good Standing prepared by the out-of-state board showing license number, initial date of licensure, means of licensure, and disciplinary history.
  5. Meet every term of the specific published reciprocity agreement — the agreement waives the trade exam only.
  6. Attach a copy of the currently valid out-of-state journeyman or master license or certification.
  7. Contractor firms must still meet the Class A/B/C experience and financial thresholds and name a Qualified Individual.
  8. Pay the fees ($171.75 (Tradesman license by the Reciprocity method of licensure is $171.75, which includes the HB30 technology fee of $7.25 per year. Card Exchange is $131.75. Contractor firm (Class A/B/C) business licenses are a separate DPOR application with their own fee schedule, not captured here. PSI exam fees, where an exam is still required, are paid directly to PSI ($40/$72/$85).)) and allow DPOR does not publish a processing-time range for tradesman reciprocity applications; set null rather than estimated..

Official links

Related guides

Frequently asked questions

Does Virginia accept a Texas contractor license?

A contractor license transfers from Texas to Virginia by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Virginia Board for Contractors (Department of Professional and Occupational Regulation), verify your Texas license, and meet Virginia's endorsement requirements. The DPOR Board for Contractors licenses individual tradesmen (electrical, plumbing, HVAC, gas fitting) and separately licenses contractor firms as Class A, B, or C. Reciprocity exists only through the Board's published Reciprocal Licensing/Examination Agreements and waives the trade examination, not the application or the experience requirements. Electrical tradesman examination reciprocity is published with Alabama, District of Columbia, Kentucky, Maryland, West Virginia, North Carolina, and Ohio (several of those are master-level only). HVAC examination reciprocity is with Maryland only. There is no state-to-state plumber reciprocity — the only plumbing/gas-fitting agreement is with the Washington Suburban Sanitary Commission, a Maryland regional body. For contractor firms there is no full license reciprocity; the Ohio Business and Law exam is accepted in lieu of Virginia's Advanced and General Law exam, and Virginia is a NASCLA Accredited Examination participating agency for the classification comparable to its Commercial Building classification..

What still applies even if reciprocity covers my trade?

Virginia's business and law exam, financial statement, bond, and registration — reciprocity waives the trade exam only, not these.

What does the Texas-to-Virginia move cost and how long does it take?

$171.75 (Tradesman license by the Reciprocity method of licensure is $171.75, which includes the HB30 technology fee of $7.25 per year. Card Exchange is $131.75. Contractor firm (Class A/B/C) business licenses are a separate DPOR application with their own fee schedule, not captured here. PSI exam fees, where an exam is still required, are paid directly to PSI ($40/$72/$85).); processing DPOR does not publish a processing-time range for tradesman reciprocity applications; set null rather than estimated..

Would the NASCLA exam help for this move?

If you do commercial general-building work, possibly — about 15 states accept the NASCLA Accredited Commercial General Building exam toward licensure. Check whether Virginia is one on the Virginia Board for Contractors (Department of Professional and Occupational Regulation) site.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-08-07.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-08-07

How we verify · All sources · spot an error? [email protected]