Skip to content
LicenseReciprocity

Engineering License from Maryland to North Carolina: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) ↗

A PE license transfers from Maryland to North Carolina by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS), verify your Maryland license, and meet North Carolina's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; North Carolina has no separate state jurisprudence or law exam.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

North Carolina grants PE licensure by comity, so a Professional Engineer licensed in Maryland does not start over — but does file a full North Carolina application. Your Maryland license, ABET degree, qualifying experience, and FE and PE results reach the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) through your NCEES Record; the board's task is to confirm they meet North Carolina's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; North Carolina has no separate state jurisprudence or law exam. Two things govern your timeline: keeping your Maryland license active and unencumbered while the North Carolina application is pending, and clearing any North Carolina-specific exam or statutes review before the license issues.

What changes, Maryland → North Carolina

Side-by-side: Maryland vs North Carolina (Engineering (PE)), verified 2026-07-21
Maryland (current)North Carolina (destination)
Application fee$56–$142 (MD reciprocal license: $56 application fee + $86 initial license fee (2-year term) = $142 total; fees effective Aug 1, 2024. Transmitting an NCEES Council Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES)$100 (NC comity application fee (non-refundable); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES)
Processing time4–8 weeks (Board states it typically takes one to two months to obtain a license by reciprocity. The Board meets monthly (usually the second Thursday) to review completed reciprocal applications; applications with an MLE (Model Law Engineer) NCEES Council Record are approved administratively on an ongoing basis. Incomplete reciprocal applications are administratively closed after 30 days)NCBELS publishes no comity turnaround; comity applications are administratively approved by the Executive Director once the NCEES Record and references are received (NCEES Record completion itself averages 2-3 weeks)
Licensing authorityMaryland State Board for Professional Engineers (Maryland Department of Labor, Division of Occupational and Professional Licensing)North Carolina Board of Examiners for Engineers and Surveyors (NCBELS)

The destination column is what you must satisfy — North Carolina sets the rules for this move.

Step by step

  1. Confirm North Carolina's current requirements on the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) website (linked below) — rules change.
  2. Submit the endorsement application to the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) (application linked below).
  3. Arrange license verification from your current state via the verification system.
  4. Hold an active PE license in another U.S. jurisdiction based on comparable qualifications.
  5. Submit an NCEES Record (or complete the education, experience, and reference sections of the application directly).
  6. Provide professional reference forms and show no record of disciplinary action.
  7. Pay the fees ($100 (NC comity application fee (non-refundable); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES)) and allow NCBELS publishes no comity turnaround; comity applications are administratively approved by the Executive Director once the NCEES Record and references are received (NCEES Record completion itself averages 2-3 weeks).

Official links

Related guides

Frequently asked questions

Does North Carolina accept a Maryland PE license?

A PE license transfers from Maryland to North Carolina by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS), verify your Maryland license, and meet North Carolina's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; North Carolina has no separate state jurisprudence or law exam.

Do I retake the FE or PE exam moving from Maryland to North Carolina?

FE and PE exam results transfer through your NCEES Record and are not retaken; North Carolina has no separate state jurisprudence or law exam.

What does the Maryland-to-North Carolina comity application cost?

$100 (NC comity application fee (non-refundable); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES).

Can I keep my Maryland PE license after I'm licensed in North Carolina?

Yes — PE licenses stack. Keep the Maryland license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]