Skip to content
LicenseReciprocity

Engineering License from Massachusetts to Illinois: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: Illinois Department of Financial and Professional Regulation (IDFPR), Division of Professional Regulation — Board of Professional Engineers ↗

A PE license transfers from Massachusetts to Illinois by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Illinois Department of Financial and Professional Regulation (IDFPR), Division of Professional Regulation — Board of Professional Engineers, verify your Massachusetts license, and meet Illinois's endorsement requirements. FE and PE exam results transfer via your NCEES Record and are not retaken; Illinois requires passage of both the FE and PE exams for licensure, but an endorsement applicant whose FE was waived in another jurisdiction may submit a waiver request to the Board (68 Ill. Adm. Code 1380.280); Illinois has no separate state law exam. Note: Professional Engineer (PE) and Structural Engineer (SE) are separate Illinois licenses.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

Illinois grants PE licensure by comity, so a Professional Engineer licensed in Massachusetts does not start over — but does file a full Illinois application. Your Massachusetts license, ABET degree, qualifying experience, and FE and PE results reach the Illinois Department of Financial and Professional Regulation (IDFPR), Division of Professional Regulation — Board of Professional Engineers through your NCEES Record; the board's task is to confirm they meet Illinois's practice act, not to re-test you. FE and PE exam results transfer via your NCEES Record and are not retaken; Illinois requires passage of both the FE and PE exams for licensure, but an endorsement applicant whose FE was waived in another jurisdiction may submit a waiver request to the Board (68 Ill. Adm. Code 1380.280); Illinois has no separate state law exam. Note: Professional Engineer (PE) and Structural Engineer (SE) are separate Illinois licenses. Two things govern your timeline: keeping your Massachusetts license active and unencumbered while the Illinois application is pending, and clearing any Illinois-specific exam or statutes review before the license issues.

What changes, Massachusetts → Illinois

Side-by-side: Massachusetts vs Illinois (Engineering (PE)), verified 2026-07-21
Massachusetts (current)Illinois (destination)
Application fee$164–$314 (Comity application fee is $164, paid to Professional Credential Services (PCS), the Board's designated application administrator; the $150 registration fee is assessed after Board approval (= $314 total). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)$100 ($100 Professional Engineer license application fee (68 Ill. Adm. Code 1380.275; the same single application fee applies to endorsement); renewal is $30 per year. Request that NCEES transmit your Record to Illinois — NCEES charges $175 first board / $100 each additional, paid separately)
Processing time8–26 weeks (PCS/Board guidance: a decision usually takes no more than 2-3 months, but applicants are advised to allow up to 6 months. A temporary permit (30 days per calendar year, extendable up to 12 months while a comity application is pending) is available to an out-of-state licensed engineer)IDFPR does not publish a guaranteed endorsement turnaround; the board's PE FAQ states that using an NCEES Record may shorten processing time
Licensing authorityMassachusetts Board of Registration of Professional Engineers and Professional Land Surveyors (Division of Occupational Licensure)Illinois Department of Financial and Professional Regulation (IDFPR), Division of Professional Regulation — Board of Professional Engineers

The destination column is what you must satisfy — Illinois sets the rules for this move.

Step by step

  1. Confirm Illinois's current requirements on the Illinois Department of Financial and Professional Regulation (IDFPR), Division of Professional Regulation — Board of Professional Engineers website (linked below) — rules change.
  2. Submit the endorsement application to the Illinois Department of Financial and Professional Regulation (IDFPR), Division of Professional Regulation — Board of Professional Engineers.
  3. Arrange license verification from your current state via the verification system.
  4. Hold a current, active PE license issued by another U.S. jurisdiction under substantially equivalent standards.
  5. Satisfy the NCEES Engineering Education Standard (EAC/ABET degree or approved equivalent; evaluations showing deficiencies are not accepted).
  6. Submit an NCEES Record in lieu of transcripts, experience forms, and exam certifications (encouraged; may shorten processing).
  7. Note that PE and SE are licensed separately in Illinois and neither can offer the other's services.
  8. Pay the fees ($100 ($100 Professional Engineer license application fee (68 Ill. Adm. Code 1380.275; the same single application fee applies to endorsement); renewal is $30 per year. Request that NCEES transmit your Record to Illinois — NCEES charges $175 first board / $100 each additional, paid separately)) and allow IDFPR does not publish a guaranteed endorsement turnaround; the board's PE FAQ states that using an NCEES Record may shorten processing time.

Official links

Related guides

Frequently asked questions

Does Illinois accept a Massachusetts PE license?

A PE license transfers from Massachusetts to Illinois by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Illinois Department of Financial and Professional Regulation (IDFPR), Division of Professional Regulation — Board of Professional Engineers, verify your Massachusetts license, and meet Illinois's endorsement requirements. FE and PE exam results transfer via your NCEES Record and are not retaken; Illinois requires passage of both the FE and PE exams for licensure, but an endorsement applicant whose FE was waived in another jurisdiction may submit a waiver request to the Board (68 Ill. Adm. Code 1380.280); Illinois has no separate state law exam. Note: Professional Engineer (PE) and Structural Engineer (SE) are separate Illinois licenses.

Do I retake the FE or PE exam moving from Massachusetts to Illinois?

FE and PE exam results transfer via your NCEES Record and are not retaken; Illinois requires passage of both the FE and PE exams for licensure, but an endorsement applicant whose FE was waived in another jurisdiction may submit a waiver request to the Board (68 Ill. Adm. Code 1380.280); Illinois has no separate state law exam. Note: Professional Engineer (PE) and Structural Engineer (SE) are separate Illinois licenses.

What does the Massachusetts-to-Illinois comity application cost?

$100 ($100 Professional Engineer license application fee (68 Ill. Adm. Code 1380.275; the same single application fee applies to endorsement); renewal is $30 per year. Request that NCEES transmit your Record to Illinois — NCEES charges $175 first board / $100 each additional, paid separately).

Can I keep my Massachusetts PE license after I'm licensed in Illinois?

Yes — PE licenses stack. Keep the Massachusetts license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]