Skip to content
LicenseReciprocity

Engineering License from Pennsylvania to Ohio: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: Ohio State Board of Registration for Professional Engineers and Surveyors ↗

A PE license transfers from Pennsylvania to Ohio by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Ohio State Board of Registration for Professional Engineers and Surveyors, verify your Pennsylvania license, and meet Ohio's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Ohio requires no state-specific engineering exam for comity applicants (only professional surveyors must pass Ohio's two-hour state-specific surveying examination).

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

Ohio grants PE licensure by comity, so a Professional Engineer licensed in Pennsylvania does not start over — but does file a full Ohio application. Your Pennsylvania license, ABET degree, qualifying experience, and FE and PE results reach the Ohio State Board of Registration for Professional Engineers and Surveyors through your NCEES Record; the board's task is to confirm they meet Ohio's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; Ohio requires no state-specific engineering exam for comity applicants (only professional surveyors must pass Ohio's two-hour state-specific surveying examination). Two things govern your timeline: keeping your Pennsylvania license active and unencumbered while the Ohio application is pending, and clearing any Ohio-specific exam or statutes review before the license issues.

What changes, Pennsylvania → Ohio

Side-by-side: Pennsylvania vs Ohio (Engineering (PE)), verified 2026-07-21
Pennsylvania (current)Ohio (destination)
Application fee$50 (Certification, licensure or registration application fee (49 Pa. Code 37.17(b)); a provisional endorsement license may be issued while remaining requirements are completed. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.)$415 (Engineering reciprocity (comity) application fee from the board's published fee schedule; a $50 PE final registration fee is due on issuance and renewal is $40 per biennium. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.)
Processing time4–6 weeks (Pennsylvania advises allowing approximately 4 to 6 weeks for initial review of an application submitted through pals.pa.gov.)The board publishes no comity turnaround on a directly accessible page; comity applications are reviewed administratively once the out-of-state verification/NCEES Record is received (NCEES Record completion itself averages 2-3 weeks).
Licensing authorityState Registration Board for Professional Engineers, Land Surveyors and GeologistsOhio State Board of Registration for Professional Engineers and Surveyors

The destination column is what you must satisfy — Ohio sets the rules for this move.

Step by step

  1. Confirm Ohio's current requirements on the Ohio State Board of Registration for Professional Engineers and Surveyors website (linked below) — rules change.
  2. Submit the endorsement application to the Ohio State Board of Registration for Professional Engineers and Surveyors (application linked below).
  3. Arrange license verification from your current state via the verification system.
  4. Hold a current PE registration in good standing in another U.S. jurisdiction with qualifications equal to Ohio's standards (Ohio Admin. Code 4733-13-01; comity administered under R.C. Chapter 4796 universal license recognition).
  5. Submit verification/affidavit of your out-of-state registration; the board accepts an NCEES Record documenting education, exams, experience, and references.
  6. Hold a bachelor's degree from an EAC/ABET-accredited program plus four years of qualifying progressive experience (eight years for ETAC/ABET engineering-technology graduates).
  7. Show no record of disciplinary action against any license held.
  8. Pay the fees ($415 (Engineering reciprocity (comity) application fee from the board's published fee schedule; a $50 PE final registration fee is due on issuance and renewal is $40 per biennium. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.)) and allow The board publishes no comity turnaround on a directly accessible page; comity applications are reviewed administratively once the out-of-state verification/NCEES Record is received (NCEES Record completion itself averages 2-3 weeks)..

Official links

Related guides

Frequently asked questions

Does Ohio accept a Pennsylvania PE license?

A PE license transfers from Pennsylvania to Ohio by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Ohio State Board of Registration for Professional Engineers and Surveyors, verify your Pennsylvania license, and meet Ohio's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Ohio requires no state-specific engineering exam for comity applicants (only professional surveyors must pass Ohio's two-hour state-specific surveying examination).

Do I retake the FE or PE exam moving from Pennsylvania to Ohio?

FE and PE exam results transfer through your NCEES Record and are not retaken; Ohio requires no state-specific engineering exam for comity applicants (only professional surveyors must pass Ohio's two-hour state-specific surveying examination).

What does the Pennsylvania-to-Ohio comity application cost?

$415 (Engineering reciprocity (comity) application fee from the board's published fee schedule; a $50 PE final registration fee is due on issuance and renewal is $40 per biennium. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.).

Can I keep my Pennsylvania PE license after I'm licensed in Ohio?

Yes — PE licenses stack. Keep the Pennsylvania license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]