Engineering License from Texas to New Jersey: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: New Jersey State Board of Professional Engineers and Land Surveyors (Division of Consumer Affairs) ↗
A PE license transfers from Texas to New Jersey by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the New Jersey State Board of Professional Engineers and Land Surveyors (Division of Consumer Affairs), verify your Texas license, and meet New Jersey's endorsement requirements. FE and PE exam results transfer through your NCEES Record (or direct board-to-board verification) and are not retaken; New Jersey requires that your original license was earned by the full written examination (8-hour Fundamentals plus 8-hour Principles and Practice) and imposes no separate state jurisprudence exam.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
New Jersey grants PE licensure by comity, so a Professional Engineer licensed in Texas does not start over — but does file a full New Jersey application. Your Texas license, ABET degree, qualifying experience, and FE and PE results reach the New Jersey State Board of Professional Engineers and Land Surveyors (Division of Consumer Affairs) through your NCEES Record; the board's task is to confirm they meet New Jersey's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record (or direct board-to-board verification) and are not retaken; New Jersey requires that your original license was earned by the full written examination (8-hour Fundamentals plus 8-hour Principles and Practice) and imposes no separate state jurisprudence exam. Two things govern your timeline: keeping your Texas license active and unencumbered while the New Jersey application is pending, and clearing any New Jersey-specific exam or statutes review before the license issues.
What changes, Texas → New Jersey
| Texas (current) | New Jersey (destination) | |
|---|---|---|
| Application fee | $75 (TBPELS PE license application fee (covers the Texas Ethics of Engineering exam); a fingerprint-based criminal-history check is also required (fee paid to the state's fingerprint vendor). Transmitting an NCEES Record costs $175 first board / $100 each additional, paid separately to NCEES. Renewal is $100 for two years.) | $75 (NJ professional engineer application fee is $75 (nonrefundable) plus an initial license fee of $80 in year one or $40 in year two of the biennial period; transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES) |
| Processing time | ~8 weeks (TBPELS states an average application processing time of about two months (eight weeks) on its PE Application Process page, depending on the adequacy of the submittal; the ethics exam, NCEES Record, and fingerprint TX DPS/FBI criminal-history check must all clear before licensure (outgoing verification requests can separately take up to 30 business days).) | Board publishes no comity turnaround; comity applications are reviewed by the Board against N.J.S.A. 45:8-35, which meets periodically |
| Licensing authority | Texas Board of Professional Engineers and Land Surveyors (TBPELS) | New Jersey State Board of Professional Engineers and Land Surveyors (Division of Consumer Affairs) |
The destination column is what you must satisfy — New Jersey sets the rules for this move.
Step by step
- Confirm New Jersey's current requirements on the New Jersey State Board of Professional Engineers and Land Surveyors (Division of Consumer Affairs) website (linked below) — rules change.
- Submit the endorsement application to the New Jersey State Board of Professional Engineers and Land Surveyors (Division of Consumer Affairs) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold an active out-of-state PE license granted upon the written 8-hour FE plus 8-hour PE examination.
- Graduate from a Board-approved four-year engineering curriculum plus four years of acceptable experience (or a four-year engineering technology curriculum plus six years).
- Submit five references, at least three from U.S.-licensed professional engineers with personal knowledge of your experience.
- Provide written verification of licensure in good standing from every state in which you are licensed.
- Pay the fees ($75 (NJ professional engineer application fee is $75 (nonrefundable) plus an initial license fee of $80 in year one or $40 in year two of the biennial period; transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES)) and allow Board publishes no comity turnaround; comity applications are reviewed by the Board against N.J.S.A. 45:8-35, which meets periodically.
Official links
Related guides
Frequently asked questions
Does New Jersey accept a Texas PE license?
A PE license transfers from Texas to New Jersey by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the New Jersey State Board of Professional Engineers and Land Surveyors (Division of Consumer Affairs), verify your Texas license, and meet New Jersey's endorsement requirements. FE and PE exam results transfer through your NCEES Record (or direct board-to-board verification) and are not retaken; New Jersey requires that your original license was earned by the full written examination (8-hour Fundamentals plus 8-hour Principles and Practice) and imposes no separate state jurisprudence exam.
Do I retake the FE or PE exam moving from Texas to New Jersey?
FE and PE exam results transfer through your NCEES Record (or direct board-to-board verification) and are not retaken; New Jersey requires that your original license was earned by the full written examination (8-hour Fundamentals plus 8-hour Principles and Practice) and imposes no separate state jurisprudence exam.
What does the Texas-to-New Jersey comity application cost?
$75 (NJ professional engineer application fee is $75 (nonrefundable) plus an initial license fee of $80 in year one or $40 in year two of the biennial period; transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES).
Can I keep my Texas PE license after I'm licensed in New Jersey?
Yes — PE licenses stack. Keep the Texas license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- NJ Board of PE&LS — Comity Review for Professional Engineers License ↗ (accessed 2026-07-21)
- NJ Board of PE&LS — Professional Engineers and Land Surveyors Fee Schedule (N.J.A.C. 13:40-6.1) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure) ↗ (accessed 2026-07-21)
- TBPELS — Basic Licensure Requirements ↗ (accessed 2026-07-21)
- TBPELS — Exam Waiver Requirements ↗ (accessed 2026-07-21)
- TBPELS — PE Application Process ↗ (accessed 2026-07-21)
- TBPELS — Agency Fees ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]