Engineering License from Vermont to California: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) ↗
A PE license transfers from Vermont to California by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG), verify your Vermont license, and meet California's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
California grants PE licensure by comity, so a Professional Engineer licensed in Vermont does not start over — but does file a full California application. Your Vermont license, ABET degree, qualifying experience, and FE and PE results reach the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) through your NCEES Record; the board's task is to confirm they meet California's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical). Two things govern your timeline: keeping your Vermont license active and unencumbered while the California application is pending, and clearing any California-specific exam or statutes review before the license issues.
What changes, Vermont → California
| Vermont (current) | California (destination) | |
|---|---|---|
| Application fee | $115 (Vermont PE application fee is $115 (one application fee covers multiple specialty disciplines applied for together); biennial renewal is $175. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.) | $175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026)) |
| Processing time | Vermont OPR publishes no comity turnaround; applications are processed by the Office once complete, subject to OPR's 90-day initial licensing policy. NCEES Record completion itself typically takes a few weeks. | No board-published comity turnaround; the application undergoes technical review and the applicant becomes eligible for any required state-specific exams (offered in limited quarterly windows) only after that review is approved, so total time varies widely |
| Licensing authority | Vermont Board of Professional Engineering (Office of Professional Regulation, Vermont Secretary of State) | California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) |
The destination column is what you must satisfy — California sets the rules for this move.
Step by step
- Confirm California's current requirements on the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) website (linked below) — rules change.
- Submit the endorsement application to the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold a PE license from another state obtained under requirements the Board deems equivalent to California's.
- Apply through BPELSG Connect and verify out-of-state licensure and exams via NCEES (an NCEES Record may replace references and transcripts for comity applicants).
- Pass the California Laws and Rules Examination.
- Civil engineers only: pass the California Seismic Principles and Engineering Surveying exams.
- Underlying standard: qualifying engineering education plus qualifying experience per Business & Professions Code sections 6751(c) and 6753.
- Pay the fees ($175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026))) and allow No board-published comity turnaround; the application undergoes technical review and the applicant becomes eligible for any required state-specific exams (offered in limited quarterly windows) only after that review is approved, so total time varies widely.
Official links
Related guides
Frequently asked questions
Does California accept a Vermont PE license?
A PE license transfers from Vermont to California by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG), verify your Vermont license, and meet California's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical).
Do I retake the FE or PE exam moving from Vermont to California?
FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical).
What does the Vermont-to-California comity application cost?
$175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026)).
Can I keep my Vermont PE license after I'm licensed in California?
Yes — PE licenses stack. Keep the Vermont license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- California BPELSG — Application Fees (PE $175, rising to $250 on 7/1/2026; state exam fees) ↗ (accessed 2026-07-21)
- California BPELSG — Licensee Fee Schedule (renewal $180 -> $250 on 7/1/2026) ↗ (accessed 2026-07-21)
- California BPELSG — PE Application Instructions (Laws & Rules exam; comity NCEES Record option) ↗ (accessed 2026-07-21)
- California BPELSG — Professional Engineer Application overview (comity applicants) ↗ (accessed 2026-07-21)
- Vermont SOS/OPR — Engineering Forms & Instructions ↗ (accessed 2026-07-21)
- Vermont OPR — Initial Licensing/Renewal Fees & Dates (Professional Engineer #018: $115 application, $175 renewal) ↗ (accessed 2026-07-21)
- Vermont Board of Professional Engineers — Administrative Rules (Aug 1 2017) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure; $175 first board / $100 each additional) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]