Skip to content
LicenseReciprocity

Plumber License from Georgia to Washington: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: Washington State Department of Labor & Industries (L&I) — Plumber Certification Program ↗

A plumbing license transfers from Georgia to Washington by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Washington State Department of Labor & Industries (L&I) — Plumber Certification Program, verify your Georgia license, and meet Washington's endorsement requirements. Washington waives its journey level (journeyman) plumber examination only for a plumber who holds a current Idaho journey level plumber certificate — the sole reciprocal state; L&I reviews the Idaho credential and issues the Washington certificate without exam. Every other out-of-state plumber must pass the Washington plumber exam; out-of-state trainee/apprenticeship hours are not accepted toward Washington certification, though a one-time 120-day temporary permit lets a non-reciprocal applicant work while awaiting the exam.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

Georgia is not among the states Washington names for an automatic exam waiver, so this move runs on the Washington State Department of Labor & Industries (L&I) — Plumber Certification Program's individual endorsement or equivalency review rather than a guarantee. Washington waives its journey level (journeyman) plumber examination only for a plumber who holds a current Idaho journey level plumber certificate — the sole reciprocal state; L&I reviews the Idaho credential and issues the Washington certificate without exam. Every other out-of-state plumber must pass the Washington plumber exam; out-of-state trainee/apprenticeship hours are not accepted toward Washington certification, though a one-time 120-day temporary permit lets a non-reciprocal applicant work while awaiting the exam. Bring your Georgia license, proof that it is active and in good standing, and your apprenticeship and exam records — and get any discretionary exam or experience credit in writing before you rely on it.

What changes, Georgia → Washington

Side-by-side: Georgia vs Washington (Plumber (journeyman/master)), verified 2026-07-21
Georgia (current)Washington (destination)
Application fee$80–$160 (Journeyman ~$80 ($70 application + $10 processing); master ~$160 ($150 application + $10 processing) per the Division's plumbing exam/initial-application form. Examination administered by PSI with a separate exam fee paid to PSI; that exam is waived only for a qualifying reciprocity applicant under Rule 121-2-.03. Fee figures obtained via search extraction of the Division's official forms because the sos.ga.gov fee-schedule PDF returned HTTP 403 on direct load)$242.7 (Idaho reciprocal journey level applicants pay the $242.70 journey level certification fee (exam waived). Non-reciprocal out-of-state applicants pay a $202.10 examination application fee (plus a PSI scheduling fee) and then the $242.70 certification fee; a one-time 120-day temporary work permit is $100.30)
Processing timeNo board-stated processing time in weeks; the Division publishes exam dates and application deadlines and an application must be approved before the scheduled examinationL&I does not publish a fixed processing time; out-of-state credentials are reviewed before the applicant may test or receive a reciprocal certificate, and approved applications are valid for one year
Licensing authorityGeorgia State Construction Industry Licensing Board — Division of Master and Journeyman Plumbers (Office of the Secretary of State)Washington State Department of Labor & Industries (L&I) — Plumber Certification Program

The destination column is what you must satisfy — Washington sets the rules for this move.

Step by step

  1. Confirm Washington's current requirements on the Washington State Department of Labor & Industries (L&I) — Plumber Certification Program website (linked below) — rules change.
  2. Submit the endorsement application to the Washington State Department of Labor & Industries (L&I) — Plumber Certification Program (application linked below).
  3. Arrange license verification from your current state via the verification system.
  4. Hold a current, unexpired Idaho journey level plumber certificate (the only reciprocal state).
  5. Submit the Plumber Certification Application (F627-008-000) with a copy of the out-of-state license/card and a government-issued photo ID to L&I's Plumber Certification program for credential review.
  6. Out-of-state trainee/apprenticeship hours are NOT accepted toward Washington certification.
  7. Non-reciprocal out-of-state applicants must pass the Washington plumber exam; a one-time 120-day temporary permit allows work in the interim.
  8. Pay the fees ($242.7 (Idaho reciprocal journey level applicants pay the $242.70 journey level certification fee (exam waived). Non-reciprocal out-of-state applicants pay a $202.10 examination application fee (plus a PSI scheduling fee) and then the $242.70 certification fee; a one-time 120-day temporary work permit is $100.30)) and allow L&I does not publish a fixed processing time; out-of-state credentials are reviewed before the applicant may test or receive a reciprocal certificate, and approved applications are valid for one year.

Official links

Related guides

Frequently asked questions

Does Washington accept a Georgia plumbing license?

A plumbing license transfers from Georgia to Washington by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Washington State Department of Labor & Industries (L&I) — Plumber Certification Program, verify your Georgia license, and meet Washington's endorsement requirements. Washington waives its journey level (journeyman) plumber examination only for a plumber who holds a current Idaho journey level plumber certificate — the sole reciprocal state; L&I reviews the Idaho credential and issues the Washington certificate without exam. Every other out-of-state plumber must pass the Washington plumber exam; out-of-state trainee/apprenticeship hours are not accepted toward Washington certification, though a one-time 120-day temporary permit lets a non-reciprocal applicant work while awaiting the exam.

Which exam applies moving from Georgia to Washington?

Washington waives its journey level (journeyman) plumber examination only for a plumber who holds a current Idaho journey level plumber certificate — the sole reciprocal state; L&I reviews the Idaho credential and issues the Washington certificate without exam. Every other out-of-state plumber must pass the Washington plumber exam; out-of-state trainee/apprenticeship hours are not accepted toward Washington certification, though a one-time 120-day temporary permit lets a non-reciprocal applicant work while awaiting the exam.

What does the Georgia-to-Washington move cost and how long does it take?

$242.7 (Idaho reciprocal journey level applicants pay the $242.70 journey level certification fee (exam waived). Non-reciprocal out-of-state applicants pay a $202.10 examination application fee (plus a PSI scheduling fee) and then the $242.70 certification fee; a one-time 120-day temporary work permit is $100.30); processing L&I does not publish a fixed processing time; out-of-state credentials are reviewed before the applicant may test or receive a reciprocal certificate, and approved applications are valid for one year.

Can I keep my Georgia plumbing license after I'm licensed in Washington?

Yes — plumbing licenses in different jurisdictions run independently. Keep the Georgia credential active on its own renewal and continuing-education schedule and you hold both, which is common for plumbers working near a state line.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]