Contractor License from Texas to California: Does It Transfer? (2026)
Last verified: 2026-08-07 · source: California Contractors State License Board (CSLB) ↗
A contractor license transfers from Texas to California by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the California Contractors State License Board (CSLB), verify your Texas license, and meet California's endorsement requirements. California's CSLB waives the trade (craft) examination for an applicant who has held an active license in good standing for the previous five years in a reciprocal state — Arizona and Nevada (broad classification coverage) or Louisiana, Mississippi, and North Carolina (General Building 'B' only, requiring the NASCLA exam). The Law and Business examination is always required. Holders of the NASCLA Commercial General Builder exam may also waive the trade exam for the 'B' classification..
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
California does not have a trade agreement covering Texas for the selected trade, so this move runs on California's case-by-case endorsement process. If you do commercial general-building work, check whether California accepts the NASCLA exam — passing it once can replace the trade exam here and in about fourteen other states. Electricians should check California's NERA status.
What changes, Texas → California
| Texas (current) | California (destination) | |
|---|---|---|
| Application fee | $30–$115 (Fees differ by agency and trade: TDLR journeyman electrician $30 and master electrician $45; TSBPE reciprocal license verification $40 non-refundable, plus the IdentoGO fingerprint fee; TDLR ACR out-of-state application $115. There is no state general-contractor license fee because Texas does not license general contractors.) | $650–$800 (Original license application (exam or waiver, one classification) $450 + initial license fee $200 sole owner / $350 non-sole owner. The $25,000 bond premium and Live Scan fingerprint fees are additional.) |
| Processing time | No single figure applies. TSBPE states a reciprocal plumbing license arrives by US mail within 30 days of the completed online application and payment; TDLR publishes no processing time for electrician or ACR reciprocity. | CSLB does not publish a firm reciprocity processing range. |
| Licensing authority | Texas Department of Licensing and Regulation (electricians, air conditioning and refrigeration) and Texas State Board of Plumbing Examiners (plumbers); no state general-contractor license | California Contractors State License Board (CSLB) |
The destination column is what you must satisfy — California sets the rules for this move.
Step by step
- Confirm California's current requirements on the California Contractors State License Board (CSLB) website (linked below) — rules change.
- Submit the endorsement application to the California Contractors State License Board (CSLB) (application linked below).
- Arrange license verification from your current state.
- Held an active license in good standing for the previous five years in the reciprocal state, in the same or comparable classification.
- Pass the CSLB Law and Business examination — it is never waived.
- Submit Live Scan fingerprints and pass a criminal background check.
- Post a $25,000 contractor bond (plus a $12,500 bond if a RMO/RME qualifies) and carry workers' compensation.
- Pay the fees ($650–$800 (Original license application (exam or waiver, one classification) $450 + initial license fee $200 sole owner / $350 non-sole owner. The $25,000 bond premium and Live Scan fingerprint fees are additional.)) and allow CSLB does not publish a firm reciprocity processing range..
Official links
Related guides
Frequently asked questions
Does California accept a Texas contractor license?
A contractor license transfers from Texas to California by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the California Contractors State License Board (CSLB), verify your Texas license, and meet California's endorsement requirements. California's CSLB waives the trade (craft) examination for an applicant who has held an active license in good standing for the previous five years in a reciprocal state — Arizona and Nevada (broad classification coverage) or Louisiana, Mississippi, and North Carolina (General Building 'B' only, requiring the NASCLA exam). The Law and Business examination is always required. Holders of the NASCLA Commercial General Builder exam may also waive the trade exam for the 'B' classification..
What still applies even if reciprocity covers my trade?
California's business and law exam, financial statement, bond, and registration — reciprocity waives the trade exam only, not these.
What does the Texas-to-California move cost and how long does it take?
$650–$800 (Original license application (exam or waiver, one classification) $450 + initial license fee $200 sole owner / $350 non-sole owner. The $25,000 bond premium and Live Scan fingerprint fees are additional.); processing CSLB does not publish a firm reciprocity processing range..
Would the NASCLA exam help for this move?
If you do commercial general-building work, possibly — about 15 states accept the NASCLA Accredited Commercial General Building exam toward licensure. Check whether California is one on the California Contractors State License Board (CSLB) site.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-08-07.
- California CSLB — Reciprocity (program states: Arizona, Louisiana, Mississippi, Nevada, North Carolina) ↗ (accessed 2026-07-21)
- California CSLB — Reciprocal Classifications List (AZ full incl. C-10/C-36/C-20; NV incl. C-20; LA/MS/NC = B only) ↗ (accessed 2026-07-21)
- California CSLB — Reciprocity Requirements (active license in good standing for the previous 5 years; NASCLA 'B' waiver) ↗ (accessed 2026-07-21)
- California CSLB — List of All Fees ($450 application; $200 sole / $350 non-sole initial license) ↗ (accessed 2026-07-21)
- TDLR — Transfer Your Out-of-State Electrician License to Texas (master and journeyman reciprocal states; $45/$30 fees; hour requirements) ↗ (accessed 2026-08-07)
- TDLR — Licensing Reciprocity for Air Conditioning and Refrigeration (Georgia and South Carolina license-to-class mapping) ↗ (accessed 2026-08-07)
- TDLR — Out of State Applicants, Air Conditioning and Refrigeration ($115 fee; insurance minimums; exam may still be required) ↗ (accessed 2026-08-07)
- TSBPE — Reciprocal License Verification Request (Louisiana and Arkansas only; $40 fee; IdentoGO fingerprints; per-state conditions) ↗ (accessed 2026-08-07)
- TSBPE — Reciprocal License Agreement with Louisiana (~30 days by mail) ↗ (accessed 2026-08-07)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-08-07
How we verify · All sources · spot an error? [email protected]