Electrician License from North Carolina to Wyoming: Does It Transfer? (2026)
Does Wyoming accept a North Carolina electrician license?
An electrical license transfers from North Carolina to Wyoming by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Wyoming State Fire Marshal's Office - Electrical Safety Division, verify your North Carolina license, and meet Wyoming's endorsement requirements. No Wyoming exam is required under reciprocity: an electrician licensed by examination (score 70%+ journeyman / 75%+ master) in a reciprocal state, held at least 1 year and in good standing, is exempt from the Wyoming exam; applicants from non-reciprocal states must pass the Wyoming exam.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Wyoming publishes no reciprocity list covering North Carolina, but the Wyoming State Fire Marshal's Office - Electrical Safety Division licenses out-of-state electricians by endorsement, so this move runs on the board's case-by-case judgment rather than an automatic waiver. If you hold a master license, check the board's separate master-level rules — master electricians typically endorse rather than transfer through journeyman reciprocity. Ask the board, in writing, exactly which exam or experience requirement it will waive before you rely on it.
What's different between North Carolina and Wyoming
Computed from both states' verified data rows, in both directions, and from the route every other origin gets into Wyoming. Exam notes are our summary of each board's published rules, with sources below.
- Route, each way
North Carolina to Wyoming (this page): Licensure by endorsement.
Wyoming to North Carolina (the reverse move): Licensure by endorsement.
The route is the same in both directions.
- Does coming from North Carolina matter?
North Carolina gets Wyoming's most common result: 20 of 50 origins (the other 49 states and DC) get the same one, so for most movers the origin does not change the answer.
The others get: reciprocity agreement (17) and no state license to transfer (13).
- Reciprocity agreements
Wyoming's reciprocity agreement list names 17 states, not including North Carolina.
North Carolina's reciprocity agreement list names 10 states (Alabama, Florida, Georgia, Mississippi, Ohio, South Carolina, Tennessee, Texas, Virginia, and West Virginia), not including Wyoming.
- Application fee
Wyoming lists $100–$200 for an out-of-state applicant and North Carolina lists $100–$200 for the reverse move; neither may be the full cost.
- Processing time
Wyoming lists about 1 week; North Carolina lists 1–2 weeks for the reverse move.
Wyoming's longest listed wait is 1 week shorter than North Carolina's.
- Experience hours
Wyoming's first-time-applicant standard is 8,000 hours of documented experience for the journeyman license; North Carolina has no experience hours figure on file, so the two cannot be compared here.
- Exam rules on record
Wyoming and North Carolina carry different exam notes (our summaries, below); any state law or jurisprudence exam is listed with each state's requirements.
- Wyoming (this move): No Wyoming exam is required under reciprocity: an electrician licensed by examination (score 70%+ journeyman / 75%+ master) in a reciprocal state, held at least 1 year and in good standing, is exempt from the Wyoming exam; applicants from non-reciprocal states must pass the Wyoming exam
- North Carolina (the reverse move): North Carolina waives its technical written examination for an electrical contractor of the same or equivalent classification licensed by exam in a reciprocal state, but every reciprocity applicant must still pass NC's 25-question open-book Laws, Rules and Business Practices exam (70% to pass); applicants from non-reciprocal states must sit the full NC examination.
What changes, North Carolina → Wyoming
| North Carolina (current) | Wyoming (destination) | |
|---|---|---|
| Experience hours | — | 8,000 |
| Application fee | $100–$200 (License fee by classification, submitted with the reciprocity application: Limited $100, Intermediate $150, Unlimited $200; specialty (SP) classifications $100 each. Unlimited/Intermediate also require a statement of bonding ability.) | $100–$200 (Journeyman license $100; master license $200) |
| Processing time | 1–2 weeks (Board instructs applicants to allow 7-10 business days for processing.) | ~1 week (Up to 5 business days to process each step (~1 week); excludes NERA / out-of-state verification turnaround) |
| Licensing authority | North Carolina State Board of Examiners of Electrical Contractors (NCBEEC) | Wyoming State Fire Marshal's Office - Electrical Safety Division |
The destination column is what you must satisfy — Wyoming sets the rules for this move.
Step by step
- Confirm Wyoming's current requirements on the Wyoming State Fire Marshal's Office - Electrical Safety Division website (linked below) — rules change.
- Submit the endorsement application to the Wyoming State Fire Marshal's Office - Electrical Safety Division (application linked below).
- Arrange license verification from your current state.
- Original license obtained by examination with a score of at least 70% (journeyman) or 75% (master), held at least 1 year from the date of examination, and in good standing with no violations.
- Document 8,000 hours of on-the-job training plus 4 years (576 hours) of apprenticeship schooling from an approved US DOL school; hours verified through NERA.
- Submit proof of 16 hours of continuing education, at least 8 of which are code-related.
- Master-level reciprocity is limited to Idaho, Iowa, and South Dakota, and master applicants must have held a journeyman license for 4 years with 8,000 hours of on-the-job training as a journeyman.
- Pay the fees listed above, and allow for the processing time shown there.
Official links
Related guides
Frequently asked questions
Does this route work for a master electrician?
Not necessarily — master licenses move on separate terms. Some boards keep their own master reciprocity list; otherwise they review the master license individually. Confirm the Wyoming State Fire Marshal's Office - Electrical Safety Division's master-level experience and exam requirements, which are separate from the journeyman track this site's grid tracks.
Sources
Primary sources only — official boards and compact commissions. Data last verified North Carolina 2026-07-21, Wyoming 2026-10-29.
- Wyoming State Fire Marshal - Electrical Safety Licensing ↗ (accessed 2026-10-29)
- NCBEEC — Reciprocity (partner states; technical exam waived without written examination) ↗ (accessed 2026-07-21)
- NCBEEC — Application for License by Reciprocity (classification fees; 25-question NC laws/rules exam; allow 7-10 business days) ↗ (accessed 2026-07-21)
Reviewed by the License Reciprocity Editorial Team · verified against primary sources North Carolina 2026-07-21, Wyoming 2026-10-29
How we verify · All sources · Corrections log · spot an error? hello@licensereciprocity.com