Electrician License from Pennsylvania to Wyoming: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Wyoming State Fire Marshal's Office - Electrical Safety Division ↗
A electrical license transfers from Pennsylvania to Wyoming by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Wyoming State Fire Marshal's Office - Electrical Safety Division, verify your Pennsylvania license, and meet Wyoming's endorsement requirements. No Wyoming exam is required under reciprocity: an electrician licensed by examination (score 70%+ journeyman / 75%+ master) in a reciprocal state, held at least 1 year and in good standing, is exempt from the Wyoming exam; applicants from non-reciprocal states must pass the Wyoming exam.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Wyoming publishes no reciprocity list covering Pennsylvania, but the Wyoming State Fire Marshal's Office - Electrical Safety Division licenses out-of-state electricians by endorsement, so this move runs on the board's case-by-case judgment rather than an automatic waiver. If you hold a master license this is usually your route regardless — master electricians typically endorse rather than transfer through journeyman reciprocity. Ask the board, in writing, exactly which exam or experience requirement it will waive before you rely on it.
What changes, Pennsylvania → Wyoming
| Pennsylvania (current) | Wyoming (destination) | |
|---|---|---|
| Training hours | — | 8,000 |
| Application fee | No statewide license, so no state fee; municipal license and exam fees vary by city and are not published statewide | $100–$200 (Journeyman license $100; master license $200) |
| Processing time | No statewide license; processing depends on the individual municipality | ~1 weeks (Up to 5 business days to process each step (~1 week); excludes NERA / out-of-state verification turnaround) |
| Licensing authority | None — no statewide electrician licensing board (licensing is municipal). State building-code oversight: Pennsylvania Department of Labor & Industry, Bureau of Occupational and Industrial Safety (Uniform Construction Code) | Wyoming State Fire Marshal's Office - Electrical Safety Division |
The destination column is what you must satisfy — Wyoming sets the rules for this move.
Step by step
- Confirm Wyoming's current requirements on the Wyoming State Fire Marshal's Office - Electrical Safety Division website (linked below) — rules change.
- Submit the endorsement application to the Wyoming State Fire Marshal's Office - Electrical Safety Division (application linked below).
- Arrange license verification from your current state.
- Original license obtained by examination with a score of at least 70% (journeyman) or 75% (master), held at least 1 year from the date of examination, and in good standing with no violations.
- Document 8,000 hours of on-the-job training plus 4 years (576 hours) of apprenticeship schooling from an approved US DOL school; hours verified through NERA.
- Submit proof of 16 hours of continuing education, at least 8 of which are code-related.
- Master-level reciprocity is limited to Idaho, Iowa, South Dakota, and Utah.
- Pay the fees ($100–$200 (Journeyman license $100; master license $200)) and allow ~1 weeks (Up to 5 business days to process each step (~1 week); excludes NERA / out-of-state verification turnaround).
Official links
Related guides
Frequently asked questions
Does Wyoming accept a Pennsylvania electrician license?
A electrical license transfers from Pennsylvania to Wyoming by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Wyoming State Fire Marshal's Office - Electrical Safety Division, verify your Pennsylvania license, and meet Wyoming's endorsement requirements. No Wyoming exam is required under reciprocity: an electrician licensed by examination (score 70%+ journeyman / 75%+ master) in a reciprocal state, held at least 1 year and in good standing, is exempt from the Wyoming exam; applicants from non-reciprocal states must pass the Wyoming exam.
Which exam will I take moving from Pennsylvania to Wyoming?
No Wyoming exam is required under reciprocity: an electrician licensed by examination (score 70%+ journeyman / 75%+ master) in a reciprocal state, held at least 1 year and in good standing, is exempt from the Wyoming exam; applicants from non-reciprocal states must pass the Wyoming exam.
What does the Pennsylvania-to-Wyoming move cost and how long does it take?
$100–$200 (Journeyman license $100; master license $200); processing ~1 weeks (Up to 5 business days to process each step (~1 week); excludes NERA / out-of-state verification turnaround).
Does this route work for a master electrician?
Usually yes — master electricians typically move by endorsement rather than journeyman reciprocity. Confirm the Wyoming State Fire Marshal's Office - Electrical Safety Division's master-level experience and exam requirements, which are separate from the journeyman track this site's grid tracks.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- Wyoming State Fire Marshal - Electrical Safety Licensing ↗ (accessed 2026-07-21)
- PA Dept. of Labor & Industry — Contractor Licensing (Commonwealth has no licensure for most construction trades; keeps no records of municipal licenses) ↗ (accessed 2026-07-21)
- PA Dept. of Labor & Industry — Uniform Construction Code (home) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]