Engineering License from Arizona to California: Does It Transfer? (2026)
Does California accept an Arizona PE license?
A PE license transfers from Arizona to California by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG), verify your Arizona license, and meet California's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
California grants PE licensure by comity, so a Professional Engineer licensed in Arizona does not start over — but does file a full California application. Your Arizona license, ABET degree, qualifying experience, and FE and PE results reach the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) through your NCEES Record; the board's task is to confirm they meet California's practice act, not to re-test you. Two things govern your timeline: keeping your Arizona license active and unencumbered while the California application is pending, and clearing any California-specific exam or statutes review before the license issues.
What's different between Arizona and California
Computed from both states' verified data rows, in both directions, and from the route every other origin gets into California. Exam notes are our summary of each board's published rules, with sources below.
- Route, each way
Arizona to California (this page): Licensure by endorsement.
California to Arizona (the reverse move): Licensure by endorsement.
The route is the same in both directions.
- Does coming from Arizona matter?
Coming from Arizona does not change the answer: every origin (the other 49 states and DC) gets the same result for a move into California.
- Application fee
California lists $175–$250 for an out-of-state applicant and Arizona lists $325 for the reverse move; neither may be the full cost.
- Exam rules on record
California and Arizona carry different exam notes (our summaries, below); any state law or jurisprudence exam is listed with each state's requirements.
- California (this move): FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical)
- Arizona (the reverse move): FE and PE exam results transfer through your NCEES Record and are not retaken; Arizona has no state-specific engineering exam and no jurisprudence exam
What changes, Arizona → California
| Arizona (current) | California (destination) | |
|---|---|---|
| Application fee | $325 ($325 combined application and initial registration fee ($100 application + $225 registration, the same structure AZBTR uses for other individual registrations), payable by check/money order/credit card to AZBTR; the same amount applies to the Reciprocity/Endorsement, Universal Licensure, and Traditional pathways. Transmitting an NCEES Record costs $175 first board / $100 each additional, paid separately to NCEES. See verification note re: a $445 figure recorded in a prior draft) | $175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026)) |
| Processing time | No published turnaround; board staff (and/or volunteer registrant reviewers) verify the application and forward it to the full Board only in rare instances. An application is not reviewed until administratively complete (all verifications received) | No board-published comity turnaround; the application undergoes technical review and the applicant becomes eligible for any required state-specific exams (offered in limited quarterly windows) only after that review is approved, so total time varies widely |
| Licensing authority | Arizona State Board of Technical Registration (AZBTR) | California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) |
The destination column is what you must satisfy — California sets the rules for this move.
Step by step
- Confirm California's current requirements on the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) website (linked below) — rules change.
- Submit the endorsement application to the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold a PE license from another state obtained under requirements the Board deems equivalent to California's.
- Apply through BPELSG Connect and verify out-of-state licensure and exams via NCEES (an NCEES Record may replace references and transcripts for comity applicants).
- Pass the California Laws and Rules Examination.
- Civil engineers only: pass the California Seismic Principles and Engineering Surveying exams.
- Underlying standard: qualifying engineering education plus qualifying experience per Business & Professions Code sections 6751(c) and 6753.
- Pay the fees listed above, and allow for the processing time shown there.
Official links
Related guides
Frequently asked questions
Can I keep my Arizona PE license after I'm licensed in California?
Yes — PE licenses stack. Keep the Arizona license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- California BPELSG — Application Fees (PE $175, rising to $250 on 7/1/2026; state exam fees) ↗ (accessed 2026-07-21)
- California BPELSG — Licensee Fee Schedule (renewal $180 -> $250 on 7/1/2026) ↗ (accessed 2026-07-21)
- California BPELSG — PE Application Instructions (Laws & Rules exam; comity NCEES Record option) ↗ (accessed 2026-07-21)
- California BPELSG — Professional Engineer Application overview (comity applicants) ↗ (accessed 2026-07-21)
- Arizona BTR — Engineer Applicants (reciprocity/endorsement & universal-licensure pathways) ↗ (accessed 2026-07-21)
- Arizona BTR — Engineer Registration Instructions (application + initial registration fee $325) ↗ (accessed 2026-07-21)
- Arizona BTR — Fee Schedule (R4-30-106 service fees; licensing fees authorized by A.R.S. 32-124) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity transmittal fees) ↗ (accessed 2026-07-21)
Reviewed by the License Reciprocity Editorial Team · verified against primary sources 2026-07-21
How we verify · All sources · Corrections log · spot an error? hello@licensereciprocity.com