Engineering License from California to Pennsylvania: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: State Registration Board for Professional Engineers, Land Surveyors and Geologists ↗
A PE license transfers from California to Pennsylvania by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the State Registration Board for Professional Engineers, Land Surveyors and Geologists, verify your California license, and meet Pennsylvania's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Pennsylvania requires no state-specific engineering exam for endorsement (state-specific exams apply only to land surveyors).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Pennsylvania grants PE licensure by comity, so a Professional Engineer licensed in California does not start over — but does file a full Pennsylvania application. Your California license, ABET degree, qualifying experience, and FE and PE results reach the State Registration Board for Professional Engineers, Land Surveyors and Geologists through your NCEES Record; the board's task is to confirm they meet Pennsylvania's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; Pennsylvania requires no state-specific engineering exam for endorsement (state-specific exams apply only to land surveyors). Two things govern your timeline: keeping your California license active and unencumbered while the Pennsylvania application is pending, and clearing any Pennsylvania-specific exam or statutes review before the license issues.
What changes, California → Pennsylvania
| California (current) | Pennsylvania (destination) | |
|---|---|---|
| Application fee | $175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026)) | $50 (Certification, licensure or registration application fee (49 Pa. Code 37.17(b)); a provisional endorsement license may be issued while remaining requirements are completed. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.) |
| Processing time | No board-published comity turnaround; the application undergoes technical review and the applicant becomes eligible for any required state-specific exams (offered in limited quarterly windows) only after that review is approved, so total time varies widely | 4–6 weeks (Pennsylvania advises allowing approximately 4 to 6 weeks for initial review of an application submitted through pals.pa.gov.) |
| Licensing authority | California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) | State Registration Board for Professional Engineers, Land Surveyors and Geologists |
The destination column is what you must satisfy — Pennsylvania sets the rules for this move.
Step by step
- Confirm Pennsylvania's current requirements on the State Registration Board for Professional Engineers, Land Surveyors and Geologists website (linked below) — rules change.
- Submit the endorsement application to the State Registration Board for Professional Engineers, Land Surveyors and Geologists (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold a current PE license in good standing in another jurisdiction whose standards are substantially equivalent to or exceed Pennsylvania's (49 Pa. Code 37.20; 63 Pa.C.S. 3111).
- Submit a copy of the current law/regulation governing licensure and scope of practice in the jurisdiction that issued the license.
- Demonstrate competency by active practice for at least 2 of the last 5 years OR completion of 24 professional development hours in the prior 24 months.
- Have no disqualifying disciplinary or criminal history; the board may require a personal interview (video permitted for good cause).
- Pay the fees ($50 (Certification, licensure or registration application fee (49 Pa. Code 37.17(b)); a provisional endorsement license may be issued while remaining requirements are completed. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.)) and allow 4–6 weeks (Pennsylvania advises allowing approximately 4 to 6 weeks for initial review of an application submitted through pals.pa.gov.).
Official links
Related guides
Frequently asked questions
Does Pennsylvania accept a California PE license?
A PE license transfers from California to Pennsylvania by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the State Registration Board for Professional Engineers, Land Surveyors and Geologists, verify your California license, and meet Pennsylvania's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Pennsylvania requires no state-specific engineering exam for endorsement (state-specific exams apply only to land surveyors).
Do I retake the FE or PE exam moving from California to Pennsylvania?
FE and PE exam results transfer through your NCEES Record and are not retaken; Pennsylvania requires no state-specific engineering exam for endorsement (state-specific exams apply only to land surveyors).
What does the California-to-Pennsylvania comity application cost?
$50 (Certification, licensure or registration application fee (49 Pa. Code 37.17(b)); a provisional endorsement license may be issued while remaining requirements are completed. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.).
Can I keep my California PE license after I'm licensed in Pennsylvania?
Yes — PE licenses stack. Keep the California license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- 49 Pa. Code Chapter 37 (fees 37.17; licensure by endorsement 37.20) ↗ (accessed 2026-07-21)
- PA Dept. of State - Engineers, Land Surveyors, Geologists board ↗ (accessed 2026-07-21)
- NCEES - Records Program (comity licensure) ↗ (accessed 2026-07-21)
- California BPELSG — Application Fees (PE $175, rising to $250 on 7/1/2026; state exam fees) ↗ (accessed 2026-07-21)
- California BPELSG — Licensee Fee Schedule (renewal $180 -> $250 on 7/1/2026) ↗ (accessed 2026-07-21)
- California BPELSG — PE Application Instructions (Laws & Rules exam; comity NCEES Record option) ↗ (accessed 2026-07-21)
- California BPELSG — Professional Engineer Application overview (comity applicants) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]