Engineering License from California to Washington: Does It Transfer? (2026)
Does Washington accept a California PE license?
A PE license transfers from California to Washington by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing, verify your California license, and meet Washington's endorsement requirements. FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; comity applicants must additionally pass the open-book Washington Engineer Law Review (minimum score 80%).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Washington grants PE licensure by comity, so a Professional Engineer licensed in California does not start over — but does file a full Washington application. Your California license, ABET degree, qualifying experience, and FE and PE results reach the Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing through your NCEES Record; the board's task is to confirm they meet Washington's practice act, not to re-test you. Two things govern your timeline: keeping your California license active and unencumbered while the Washington application is pending, and clearing any Washington-specific exam or statutes review before the license issues.
What's different between California and Washington
Computed from both states' verified data rows, in both directions, and from the route every other origin gets into Washington. Exam notes are our summary of each board's published rules, with sources below.
- Route, each way
California to Washington (this page): Licensure by endorsement.
Washington to California (the reverse move): Licensure by endorsement.
The route is the same in both directions.
- Does coming from California matter?
Coming from California does not change the answer: every origin (the other 49 states and DC) gets the same result for a move into Washington.
- Application fee
Washington lists $110 for an out-of-state applicant and California lists $175–$250 for the reverse move; neither may be the full cost.
- Processing time
Washington lists up to 4 weeks; California has no verified processing-time figure on file, so the two cannot be compared here.
- Exam rules on record
Washington and California carry different exam notes (our summaries, below); any state law or jurisprudence exam is listed with each state's requirements.
- Washington (this move): FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; comity applicants must additionally pass the open-book Washington Engineer Law Review (minimum score 80%)
- California (the reverse move): FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical)
What changes, California → Washington
| California (current) | Washington (destination) | |
|---|---|---|
| Application fee | $175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026)) | $110 (Washington PE comity registration application fee is $110 (payable to the Department of Licensing; includes license and wall certificate). Biennial renewal is $128. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES.) |
| Processing time | No board-published comity turnaround; the application undergoes technical review and the applicant becomes eligible for any required state-specific exams (offered in limited quarterly windows) only after that review is approved, so total time varies widely | up to 4 weeks (BRPELS issues new licenses the first week of each month and asks applicants to contact the office only if more than 4 weeks have passed; transmitting an NCEES Record is the preferred, faster path but does not generate automatic approval.) |
| Licensing authority | California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) | Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing |
The destination column is what you must satisfy — Washington sets the rules for this move.
Step by step
- Confirm Washington's current requirements on the Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing website (linked below) — rules change.
- Submit the endorsement application to the Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold an active engineering license issued by another NCEES member board, in good standing.
- Have passed the NCEES FE and PE examinations, with results verified through your NCEES Record or the issuing board.
- Pass the open-book Washington Engineer Law Review with a score of at least 80%.
- Document 8 years of progressive engineering experience under a licensed PE (an ABET-accredited engineering degree counts as 4 years).
- Pay the fees listed above, and allow for the processing time shown there.
Official links
Related guides
Frequently asked questions
Can I keep my California PE license after I'm licensed in Washington?
Yes — PE licenses stack. Keep the California license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- BRPELS — Professional Engineer by Comity ↗ (accessed 2026-07-21)
- BRPELS — Fees (PE comity $110; PE renewal $128) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure; $175 first board / $100 each additional) ↗ (accessed 2026-07-21)
- California BPELSG — Application Fees (PE $175, rising to $250 on 7/1/2026; state exam fees) ↗ (accessed 2026-07-21)
- California BPELSG — Licensee Fee Schedule (renewal $180 -> $250 on 7/1/2026) ↗ (accessed 2026-07-21)
- California BPELSG — PE Application Instructions (Laws & Rules exam; comity NCEES Record option) ↗ (accessed 2026-07-21)
- California BPELSG — Professional Engineer Application overview (comity applicants) ↗ (accessed 2026-07-21)
Reviewed by the License Reciprocity Editorial Team · verified against primary sources 2026-07-21
How we verify · All sources · Corrections log · spot an error? hello@licensereciprocity.com