Engineering License from Idaho to New York: Does It Transfer? (2026)
Does New York accept an Idaho PE license?
A PE license transfers from Idaho to New York by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the New York State Board for Engineering, Land Surveying and Geology (NYSED Office of the Professions), verify your Idaho license, and meet New York's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; endorsement requires that your original license was issued upon a written examination equivalent to New York's, and there is no state jurisprudence exam; note that New York will not accept professional experience self-endorsed by the applicant, so the NCEES Record must be verified before transmission.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
New York grants PE licensure by comity, so a Professional Engineer licensed in Idaho does not start over — but does file a full New York application. Your Idaho license, ABET degree, qualifying experience, and FE and PE results reach the New York State Board for Engineering, Land Surveying and Geology (NYSED Office of the Professions) through your NCEES Record; the board's task is to confirm they meet New York's practice act, not to re-test you. Two things govern your timeline: keeping your Idaho license active and unencumbered while the New York application is pending, and clearing any New York-specific exam or statutes review before the license issues.
What's different between Idaho and New York
Computed from both states' verified data rows, in both directions, and from the route every other origin gets into New York. Exam notes are our summary of each board's published rules, with sources below.
- Route, each way
Idaho to New York (this page): Licensure by endorsement.
New York to Idaho (the reverse move): Licensure by endorsement.
The route is the same in both directions.
- Does coming from Idaho matter?
Coming from Idaho does not change the answer: every origin (the other 49 states and DC) gets the same result for a move into New York.
- Application fee
New York lists $377 for an out-of-state applicant; Idaho has no verified fee figure on file, so the two cannot be compared here.
- Exam rules on record
New York and Idaho carry different exam notes (our summaries, below); any state law or jurisprudence exam is listed with each state's requirements.
- New York (this move): FE and PE exam results transfer through your NCEES Record and are not retaken; endorsement requires that your original license was issued upon a written examination equivalent to New York's, and there is no state jurisprudence exam; note that New York will not accept professional experience self-endorsed by the applicant, so the NCEES Record must be verified before transmission
- Idaho (the reverse move): FE and PE (NCEES) exam results transfer via your NCEES Record and are not retaken — having passed the NCEES exams satisfies Idaho's examination requirement; Idaho has no separate state law exam for PE comity (a state surveying exam applies only to land surveyors, not to the PE credential)
What changes, Idaho → New York
| Idaho (current) | New York (destination) | |
|---|---|---|
| Application fee | Idaho Code 54-1219 caps the comity application fee at a maximum of $150 (examination applicants are capped at $100 under 54-1213); the specific fee is set by DOPL within that cap. DOPL reduced all board fees by ~60% effective July 1, 2025 (Idaho Code 67-2608(3)), and the current DOPL fee schedule could not be loaded from a reachable official page at verification, so the exact current comity fee is left null rather than guessed. NCEES Record transmittal is $175 first board / $100 each additional, paid to NCEES | $377 (NY fee for licensure and first registration is $377 (the same fee applies to the endorsement pathway); transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES) |
| Processing time | DOPL does not publish a comity processing time; each comity application is considered by the board for substantial compliance with Idaho's licensure requirements | The NYSED Office of the Professions does not publish a comity/endorsement processing time on its engineering pages |
| Licensing authority | Idaho Board of Licensure of Professional Engineers and Professional Land Surveyors (IPELS), Division of Occupational and Professional Licenses (DOPL) | New York State Board for Engineering, Land Surveying and Geology (NYSED Office of the Professions) |
The destination column is what you must satisfy — New York sets the rules for this move.
Step by step
- Confirm New York's current requirements on the New York State Board for Engineering, Land Surveying and Geology (NYSED Office of the Professions) website (linked below) — rules change.
- Submit the endorsement application to the New York State Board for Engineering, Land Surveying and Geology (NYSED Office of the Professions) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold a PE license or certificate from another U.S. state or jurisdiction issued upon a written examination equivalent to New York's.
- Meet all New York licensure requirements except examination, including professional education and satisfactory experience.
- Submit Form 1 and have NCEES transmit your verified NCEES Record to the Department (or file Form 2 certification of education and Form 3 verification of out-of-state licensure and examination).
- Be of good moral character.
- Pay the fees listed above, and allow for the processing time shown there.
Official links
Related guides
Frequently asked questions
Can I keep my Idaho PE license after I'm licensed in New York?
Yes — PE licenses stack. Keep the Idaho license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- NYSED Office of the Professions — Engineering License Requirements (endorsement) ↗ (accessed 2026-07-21)
- NYSED Office of the Professions — Engineering License Application Forms ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure) ↗ (accessed 2026-07-21)
- Idaho Code 54-1219 — Comity Licensure; Fee (comity fee not to exceed $150) ↗ (accessed 2026-07-21)
- Idaho Admin. Code IDAPA 24.32.01.019 — Licensees or Certificate Holders of Other States, Boards, and Countries (comity requirements + 8-year waiver) ↗ (accessed 2026-07-21)
- Idaho DOPL — Board of Professional Engineers and Land Surveyors (IPELS home) ↗ (accessed 2026-07-21)
- Idaho DOPL — press release: statewide ~60% board fee reduction effective July 1, 2025 ↗ (accessed 2026-07-21)
Reviewed by the License Reciprocity Editorial Team · verified against primary sources 2026-07-21
How we verify · All sources · Corrections log · spot an error? hello@licensereciprocity.com