Skip to content
LicenseReciprocity

Contractor License from Tennessee to California: Does It Transfer? (2026)

Last verified: 2026-08-07 · source: California Contractors State License Board (CSLB) ↗

A contractor license transfers from Tennessee to California by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the California Contractors State License Board (CSLB), verify your Tennessee license, and meet California's endorsement requirements. California's CSLB waives the trade (craft) examination for an applicant who has held an active license in good standing for the previous five years in a reciprocal state — Arizona and Nevada (broad classification coverage) or Louisiana, Mississippi, and North Carolina (General Building 'B' only, requiring the NASCLA exam). The Law and Business examination is always required. Holders of the NASCLA Commercial General Builder exam may also waive the trade exam for the 'B' classification.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

California has no license-to-license agreement covering Tennessee for the selected trade, so this move runs on California's case-by-case endorsement process. If you do commercial general-building work, note that California accepts the NASCLA exam in place of its own trade exam. Electricians should check California's NERA status.

What changes, Tennessee → California

Side-by-side: Tennessee vs California (Contractor (GC/electrical/plumbing/HVAC)), verified 2026-08-07
Tennessee (current)California (destination)
Application fee$250 (Initial contractor license application fee $250. The CPA-prepared reviewed or audited financial statement is a separate professional cost, and some verifying states charge a fee to complete the Board's license-verification form. Beginning July 1, 2026 exams are administered by Prov.)$650–$800 (Original license application (exam or waiver, one classification) $450 + initial license fee $200 sole owner / $350 non-sole owner. The $25,000 bond premium and Live Scan fingerprint fees are additional.)
Processing timeNo processing-time estimate is published; applications are acted on at the Board's scheduled meetingsCSLB does not publish a firm reciprocity processing range
Licensing authorityTennessee Board for Licensing Contractors (Department of Commerce and Insurance)California Contractors State License Board (CSLB)

The destination column is what you must satisfy — California sets the rules for this move.

Step by step

  1. Confirm California's current requirements on the California Contractors State License Board (CSLB) website (linked below) — rules change.
  2. Submit the endorsement application to the California Contractors State License Board (CSLB) (application linked below).
  3. Arrange license verification from your current state.
  4. Held an active license in good standing for the previous five years in the reciprocal state, in the same or comparable classification.
  5. Pass the CSLB Law and Business examination — it is never waived.
  6. Submit Live Scan fingerprints and pass a criminal background check.
  7. Post a $25,000 contractor bond (plus a $12,500 bond if a RMO/RME qualifies) and carry workers' compensation.
  8. Pay the fees ($650–$800 (Original license application (exam or waiver, one classification) $450 + initial license fee $200 sole owner / $350 non-sole owner. The $25,000 bond premium and Live Scan fingerprint fees are additional.)). Processing time: CSLB does not publish a firm reciprocity processing range.

Official links

Related guides

Frequently asked questions

Does California accept a Tennessee contractor license?

A contractor license transfers from Tennessee to California by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the California Contractors State License Board (CSLB), verify your Tennessee license, and meet California's endorsement requirements. California's CSLB waives the trade (craft) examination for an applicant who has held an active license in good standing for the previous five years in a reciprocal state — Arizona and Nevada (broad classification coverage) or Louisiana, Mississippi, and North Carolina (General Building 'B' only, requiring the NASCLA exam). The Law and Business examination is always required. Holders of the NASCLA Commercial General Builder exam may also waive the trade exam for the 'B' classification.

What still applies even if reciprocity covers my trade?

California's business and law exam, financial statement, bond, and registration — reciprocity waives the trade exam only, not these.

What does the Tennessee-to-California move cost and how long does it take?

$650–$800 (Original license application (exam or waiver, one classification) $450 + initial license fee $200 sole owner / $350 non-sole owner. The $25,000 bond premium and Live Scan fingerprint fees are additional.) Processing time: CSLB does not publish a firm reciprocity processing range.

Would the NASCLA exam help for this move?

Possibly, for the trade it covers: California's board accepts a NASCLA accredited exam in place of its own trade exam (verified 2026-07-21). The business/law exam, bond and application still apply.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-08-07.

Reviewed by the License Reciprocity Editorial Team · verified against primary sources 2026-08-07

How we verify · All sources · spot an error? [email protected]